Home / Systems / Compatibility
Rosenberger / Magcode magnetic charge connector (magnetic snap, keyed): pinout, rating and use
What the Rosenberger / Magcode magnetic charge connector carries, how it is rated, and which e-bike systems use it.
Power panel
Voltage
used on 36 V (42 V charge) high-end packs
Connector data
| Pins / contacts | magnetic contact face, self-aligning, snaps on and pulls off cleanly |
|---|---|
| Current rating | sized for the pack, typically a 4 A charge on Specialized |
| Voltage range | used on 36 V (42 V charge) high-end packs |
| Locking | magnetic, self-aligning, no exposed pins to bend |
| Common uses | high-end e-bikes, notably Specialized Turbo, where it charges through a magnetic port |
Common uses: high-end e-bikes, notably Specialized Turbo, where it charges through a magnetic port. Systems: Brose Drive / Specialized Turbo (Full Power).
The Rosenberger (also called Magcode) is a magnetic charge connector: it snaps on, self-aligns and pulls away cleanly if the cable is yanked. Specialized uses it on the Turbo range with a 42 V 4 A charger. It is proprietary, so a generic barrel or XLR charger will not connect.
Systems and other connectors
Brose Drive / Specialized Turbo (Full Power)Specialized 2.1 / 2.2, Brose S-MagXLR 3-pin charge connector3-pin locking, up to 16 ADC barrel (coaxial) charge connector5.5 x 2.1 or 5.5 x 2.5 mm
Sources: Cyberpika, Connector Types Explained: DC Barrel, XLR, Rosenberger ยท Specialized, M2 and M3 UL/EN series battery