Home / Systems / Compatibility

Shimano STEPS EP8 / EP801 / EP600

Which charger fits a Shimano STEPS EP8 / EP801 / EP600 bike?

The charger that fits a Shimano STEPS EP8 / EP801 / EP600 e-bike, the connector it uses, and the wrong unit to avoid.

FITS

Use the Shimano EC-E8004 / EC-E6002 charger. A Shimano STEPS EP8 / EP801 / EP600 bike charges through the Higo / Julet charge and signal connector at 4 A, so the correct charger is the Shimano EC-E8004 / EC-E6002 charger.

ConnectorHigo / Julet charge and signal connector
Power panel
Voltage
36 V
Connector
Higo / Julet charge and signal connector
Drive system
Shimano STEPS EP8 / EP801 / EP600
The charger for this system
Drive systemShimano STEPS EP8 / EP801 / EP600
Charger to buyShimano EC-E8004 / EC-E6002 charger
Charge current4 A
ConnectorHigo / Julet charge and signal connector
Output36 V nominal pack

A Shimano STEPS EP8 / EP801 / EP600 bike uses the Higo / Julet charge and signal connector. The matching charger is the Shimano EC-E8004 / EC-E6002 charger at 4 A.

Current Shimano STEPS packs charge with the EC-E6002 or EC-E8004. The trap is the older EC-E6000: it uses the same connector but no longer charges newer BT-E8010 units, so a look-alike old charger can fail to work.

The charger to buy
Search Amazon for Shimano EC-E8004 / EC-E6002 chargeraffiliate searchFind Shimano EC-E8004 / EC-E6002 charger on eBayaffiliate
System, connector and battery
Shimano STEPS EP8 / EP801 / EP600DU-EP800, EP801, EP600Shimano EC-E8004 / EC-E6002 charger4 A, STEPS, Higo portHigo / Julet charge and signal connectorkeyed, up to about 20 AReplacement battery for a Shimano STEPS EP8 / EP801 / EP600 bikeresolution

Sources: Shimano, Battery and battery charger compatibility C-562 · REI, Shimano STEPS BT-E8010 504 Wh external battery · ebikes.ca, E-bike Connectors reference · Qiolor, E-bike connector types explained