Home / Systems / Compatibility
Shimano STEPS EP8 (DU-EP800), the updated EP801 and the mid-level EP600 e-MTB and trekking drive unitsShimano STEPS EP8 / EP801 / EP600 (DU-EP800, EP801, EP600): batteries, charger and fit
Which batteries and charger fit a Shimano STEPS EP8 / EP801 / EP600 e-bike, and the packs it will and will not accept.
| Brand | Shimano |
|---|---|
| Drive units | Shimano STEPS EP8 (DU-EP800), the updated EP801 and the mid-level EP600 e-MTB and trekking drive units |
| Nominal voltage | 36 V nominal |
| Charge connector | Higo / Julet charge and signal connector |
| Charger | Shimano EC-E8004 / EC-E6002 charger |
| Batteries that fit | Shimano STEPS BT-E8036, Shimano STEPS BT-EN806, Shimano STEPS BT-E8016, Shimano STEPS BT-E8035, Shimano STEPS BT-E8010 |
Drive units: Shimano STEPS EP8 (DU-EP800), the updated EP801 and the mid-level EP600 e-MTB and trekking drive units.
The EP8 family (EP8/EP801/EP600) is Shimano's current e-MTB and trekking drive. The trap is the two 630 Wh batteries: the BT-E8036 is for this generation while the BT-EN806 is a look-alike with a different port. Read the printed model number, do not go by shape.
It charges through the Higo / Julet charge and signal connector using the Shimano EC-E8004 / EC-E6002 charger.
Sources: Shimano, EP600 mid-level drive unit introduction · Summit Cycles, Shimano BT-EN806 630Wh for DU-EP801/EP600 · eBike Delight, Shimano STEPS e-bike motor guide (EP8/EP801/EP6) · ebikes.ca, E-bike Connectors reference · Qiolor, E-bike connector types explained · Shimano, Battery and battery charger compatibility C-562 · REI, Shimano STEPS BT-E8010 504 Wh external battery