Home / Systems / Compatibility

Shimano STEPS EP8 / EP801 / EP600

Which replacement battery fits a Merida eONE-SIXTY (Shimano EP8)?

The replacement battery that fits a Merida eONE-SIXTY (Shimano EP8), the charger it uses, and what not to buy.

FITS

Fits with the Shimano STEPS BT-EN806. A Merida eONE-SIXTY (Shimano EP8) runs the Shimano STEPS EP8 / EP801 / EP600, so the replacement battery is the Shimano STEPS BT-EN806 (630 Wh, 36 V in-tube).

ConnectorHigo / Julet charge and signal connector
Power panel
Voltage
36 V
Energy
630 Wh
Connector
Higo / Julet charge and signal connector
Drive system
Shimano STEPS EP8 / EP801 / EP600
This bike's fitment
BikeMerida eONE-SIXTY (Shimano EP8)
Drive systemShimano STEPS EP8 / EP801 / EP600
Battery that fitsShimano STEPS BT-EN806 (630 Wh, 36 V in-tube)
Charge portHigo / Julet charge and signal connector
ChargerShimano EC-E8004 / EC-E6002 charger

The Merida eONE-SIXTY on EP8 or EP801 uses a STEPS in-tube pack; EP801 builds take the 630 Wh BT-EN806.

Read the drive-unit number: an EP800 build wants the BT-E8036 while an EP801 build wants the BT-EN806, and the two do not cross over.

The battery to buy
Search Amazon for Shimano STEPS BT-EN806 (630 Wh, 36 V in-tube)affiliate searchFind Shimano STEPS BT-EN806 (630 Wh, 36 V in-tube) on eBayaffiliate
Battery, system and charger
Shimano STEPS BT-EN806630 Wh, 36 V in-tubeShimano STEPS EP8 / EP801 / EP600DU-EP800, EP801, EP600All replacement packs for Shimano STEPS EP8 / EP801 / EP600resolutionCharger for this bikeresolutionBattery for a Orbea Rise (Shimano EP8 / EP801)same system

Sources: Shimano, EP600 mid-level drive unit introduction · Summit Cycles, Shimano BT-EN806 630Wh for DU-EP801/EP600 · eBike Delight, Shimano STEPS e-bike motor guide (EP8/EP801/EP6) · E-MTB Magazine, New 630 Wh Shimano battery and display · Shimano, BT-E8036 special battery user's manual